Zhongshan Anto Electric Appliance Co., Ltd. is one of the leading manufacturers and suppliers of whole house instant electric water heater in China, also supports customized service. Welcome to wholesale cheap whole house instant electric water heater made in China here and get quotation from our factory. Quality products and low price are available.
A whole house instant electric water heater is suitable only when its verified output covers the required simultaneous hot-water demand. The compact ANTO listing shows a 3.5–5.5 kW reference range, which must not be treated as proof of whole-house capacity. Establish the duty first, then discuss the product and ongoing trade support.
Check the capacity behind the whole-house label
Only when its verified capacity meets the home's simultaneous hot-water demand at the required temperature rise. The existing ANTO listing shows a 3.5–5.5 kW compact range. That reference alone is not evidence that the unit can supply several showers and sinks together.
For developers, importers and plumbing contractors, the first decision is therefore the heating arrangement: one central system, individual point-of-use heaters or another specified solution. Keep the design open until the demand calculation and available electrical capacity have been checked.
Reference data from the current product listing
These are published listing values for initial discussion, not a verified offer for a particular model. Obtain a current datasheet and model identification before specifying equipment.
| Parameter | Listing reference | What needs confirmation |
|---|---|---|
| Power range | 3.5–5.5 kW | Actual rated input of the offered version. |
| Supply range | 110–240 V | Which voltage pairs with each power option. |
| Temperature setting | 25–55°C | Measured output at the project's inlet temperature and flow. |
| Water connection | G1/2 | Drawing and suitability for the intended market. |
| Mounting | Wall-mounted or under-sink | Approved orientation, dimensions and clearance. |
Product illustration - confirm the configuration against the selected model.
Separate whole-house demand from point-of-use demand
Single outletEvaluate the flow and temperature needed at that fixture. Local heating may be relevant where the rest of the building uses another hot-water source. |
Several concurrent outletsAdd the flows that must be heated together. The total load can be substantially different from the demand at one basin. |
Seasonal conditionsUse the lowest expected inlet temperature for the required service level. A satisfactory warm-weather demonstration does not establish winter performance. |
|
As a sizing illustration, heating 8 L/min by 30°C requires about 16.7 kW of heat delivered to the water, before system losses. This follows the water energy balance and is not an ANTO model rating. It explains why a 5.5 kW listing cannot by itself support a broad whole-house claim.
Tankless operation and energy use
Tankless heating does not maintain a stored tank of hot water, so it can avoid the standby loss associated with that tank. Actual electricity use still depends on hot-water volume, inlet temperature, setpoint, pipework and system operation. A fixed saving percentage cannot be inferred from the absence of a tank.
Compare alternatives using the same demand assumptions. Include electrical upgrades, installation work and servicing access in the project review, rather than making the decision from heater purchase price alone.
Product illustration - confirm the configuration against the selected model.
Project documents to request before approval
Ask for the exact model's performance curve, installation manual, wiring requirements, dimensions and compliance documentation relevant to the destination. Compare the declared input with the label on the sample. Any inconsistency in power, current or voltage should be resolved before the model enters the project schedule.
Also request evidence of the inspection process and a defined acceptance record for the order. Factory size, production capacity, certifications and delivery commitments should be supported by current documents rather than repeated from a general marketing page.
Choose a supplier relationship around the agreed duty
For smaller developers and trade buyers, a clear specification protects the discussion after delivery. Retain the approved configuration and its intended application, particularly when a compact heater is used for a local outlet within a larger property. Do not describe that arrangement as verified whole-house supply unless the full demand has been checked.
A channel after purchaseANTO gives every cooperating customer access to an online after-sales service system and responds promptly to enquiries. Use the agreed model and application details when raising a product question. |
Support agreed for the partnershipDiscuss relevant cooperation policies and product spare-parts concessions with ANTO. The applicable scope is agreed for the cooperation; it does not establish a blanket warranty or free replacement entitlement. |
Can a buyer obtain materials for a product presentation?
For customers who need them, ANTO can provide packaging DIY support, high-resolution product images and product videos. Match the presentation to the approved configuration and capacity. Sales materials must not suggest a larger heating duty than the selected equipment can deliver.
Supply scope and commercial discussion
Send the project location, fixture schedule, simultaneous demand and available electrical service with your required quantity. State whether you need individual units for local outlets or an engineered whole-house solution. Discuss branding, documentation language, packaging and support as part of the written supply scope.
If the compact range does not meet the calculated duty, request a suitable alternative. Do not compensate for a capacity shortfall by promising unlimited flow or assuming that temperature controls can create additional heating power.
Whole-house specification FAQ
Is the product name a performance guarantee?
No. The selected model must be matched to the actual duty. Use tested flow and temperature-rise data to decide whether a configuration fits the project.
Does continuous heating mean unlimited hot-water flow?
No. A tankless heater can operate without a stored-volume limit, but its instantaneous heating capacity still limits flow at a particular temperature rise.
Should I change to several local units?
That is a design question. Compare electrical distribution, pipe lengths, peak use and maintenance requirements with your project team before choosing a layout.
Explore a more specific application
Compare multi-point outlet planning for grouped fixtures or commercial local hot-water supply when only selected outlets need heating.
Define the duty for your whole house instant electric water heater enquiry
Before specifying a whole house instant electric water heater, send ANTO the simultaneous fixture demand, winter inlet temperature, target delivery temperature and available electrical service. Add the number of properties or units required and the support your business needs. If the compact range cannot meet that duty, review an alternative arrangement instead of relying on an unsupported whole-house claim.

Product Parameter (specification)
|
Product name: |
Whole House Instant Electric Water Heater |
|
Voltage: |
110V~240V |
|
Wattage |
3.5KW~5.5KW |
|
Max. amp load |
16A~25A |
|
Mm.wire size |
2.5mm² |
|
Rated pressure |
0.02~0.6Mpa |
|
Mm.Water flow to activate |
1.2~1.5L/Min |
|
Heating body: |
Patented DSC Heating Parts |
|
Temperature Range: |
77-131 Degrees F/ 25-55 Degrees |
|
Thermal Efficiency: |
98% |
|
Waterproof rating: |
IPX55 |
|
Water Connections: |
G1/2 |
|
Installation: |
Wall-mounted or under-sink |
|
Temperature Setting: |
Touch Digital Panel |
|
Application: |
Hotel, Car, RV, Commercial, Household |
|
Our advantage: |
We have our own mold factory, which can save you costs by developing new products for you. We have three engineers who provide product optimization and ODM services. If you want to develop a new product, please contact us. We provide lower development cost, more advantageous price,e and better service. |
|
Our services: |
ONE-STOP E-COMMERCE SERVICE Drop-shipping Service Fast Delivery in 48 Hours High-Definiation Pic&Video, Logo Design ODM and OEM |
Click here to contact our overseas sales manager immediately for a more favorable price.
Please pay attention to our website, collect it, and we will release more industry knowledge and purchasing skills from time to time.
*If you want to confirm more details with us, please contact us directly: +86 15995490721





Good for Other Commercial Places
Such as: apartment, barbershop, hotel, beauty salon, gym center, restaurent and so on.



Delivery, shipping, and service
1. Fastest delivery in 10 days
2. More than 19 years of production experience in the field of combustion heating and electric heating
3 . Acceptable OEM with low MOQ
4. New product rapid ODM development capability, 2- 3 models per year
5. Obtained ETL. CE.ROHS certification and product design patents
Packaging & Delivery
Selling Units: Single item
Single package size: 27X20X5.5 cm
Single gross weight:2.000 kg
Package Type: packed in a carton box
1) Inner packing: packed in bubble bags.
2) Packed in a gift box. We can print it according to your design.
3) Packed in a carton box
The Whole House Instant Electric Water Heater uses our company-designed carton box, or we can make it according to your design.
4) As for the logo, manual book, and sticker, if the order is large, we can make them according to your design.
5) As for the shipment, client own courier or is shipped by us by sea or other shipping way.
Lead Time:
|
Quantity(Units) |
1 - 50 |
51 - 5000 |
>5000 |
|
Est. Time(days) |
7 |
15 |
To be negotiated |

Core services
1% free spare parts; can negotiate with sincerity
Provide timely feedback and good after-sales service
Helps quickly analyze and resolve any issues
Support personalized customization, one-piece delivery, one-stop service from design, R&D, production, sales, etc.
In the development of ANTO Whole House Instant Electric Water Heaters for more than ten years, through continuous market experience summarization, whether the instant electric water heater franchisees can do a good job in the instant electric water heater industry is largely dependent on the It is up to you. In market operations, the brand can only guarantee its market influence and product quality innovation. However, more market operation rules, how to market the market, agents should continue to summarize and learn. If you discover it, you will do what others can't. The ANTO team is committed to in-depth analysis of the water heater industry. The rapid development of ANTO Intelligent Automatic Constant Temperature instant tankless water heaters in recent years is largely due to customers' confidence in the ANTO brand and our ability to deliver value.



Hot Tags: whole house instant electric water heater, whole house tankless heater sizing, electric water heater project procurement, whole house versus point of use, Top Rated Heat Pump Water Heater, Instant Heater for Bathroom, 120v Instant Hot Water Heater, Instant Residential Electric On Demand Water Heater, Electric Tankless Water Heater for Bathtub, Instantaneous Water Heater













