Is it worth paying more for the "zero cold water" technology of water heater?

Before the Spring Festival, Xiao Lei was going to buy a water heater for his family, so he spent a lot of time studying all kinds of products on the market. It is found that the electric water heater will be better in bathing experience and safety, but the water heater needs to be turned on half an hour or an hour before each bath, and it will take a long time for a large number of people in the family, so there is no way to take a shower. Gas water heater can use water at any time and have hot water at any time, and there is no need to worry about too many people and not enough hot water. It seems to be a better choice.
However, after in-depth understanding of gas water heaters, it is found that this kind of products have a particularly serious drawback, that is, it may take more than ten seconds to produce hot water before each use, which is somewhat wasteful. Once the hot water is turned off and turned on again in the middle of a bath, cold water will come out first and then hot water. If you don't pay attention to taking a bath in winter, you may be frozen. In addition, if the water pressure at home is unstable, the water temperature from the gas water heater will also change, and you may be burned if you are not careful. Although the gas water heater has solved the problem of a large amount of water consumption in a family of many people, it also has some shortcomings.
However, in recent years, a large number of so-called "zero cold water" water heaters have appeared on the market. It is said that hot water can be produced every second with water, and there is no need to wait, and a pot of cold water will not be suddenly poured when bathing. How does this zero-cold water heater realize "zero-cold water"? This technology is unreliable, and is it worth paying for?
The secret of realizing zero cold water is just one more water pipe.
Lei looked up a lot of information on the Internet, and finally he thoroughly studied and understood the zero cold water heater. Compared with the traditional gas water heater, the advantage of zero cold water heater is that it can be heated at once, and there is hot water at any time, so it is not necessary to put off a big bucket of cold water every time before hot water is produced. It is quite simple to realize this function. In fact, it is to heat the water in the cold water section pipeline by means of water circulation, so that the whole water pipe is always filled with hot water.
It can be understood that every time the water heater is turned on, the cold water comes out first because there is a long water pipe between the shower and the water outlet of the water heater, and the hot water heated by the water heater will flow out after the cold water in this pipe is put out first. Moreover, after the gas water heater is started, the water temperature can not be raised immediately, and the priority is still cold water, so you will feel that it will take a long time to get hot water after turning on the water heater every time. The working principle of zero cold water is to let the cold water flowing out of the above process flow back to the water heater for heating, which is equivalent to the fact that the hot water has been on all the time, so there will naturally be no cold water left in the pipe.
So, how does the zero-cold water heater make the cold water in the pipe circulate and return to heat? At present, there are two kinds of situations in the market: return pipe and return pipe. Because return pipe is embedded in the wall when it needs to be renovated, almost all the old houses are return pipe-free, and it is impossible for many people to smash the wall and bury pipes in order to install a water heater. In this case, a "backwater valve" can only be installed at the farthest end of the waterway to connect the hot water pipe with the cold water pipe, so that the hot water, cold water and water heater can form a loop. At this time, with the help of the circulating pump at the water inlet, the water heater can continuously pump back the cold water for heating, thus realizing zero cold water in the water pipe.
In view of the newly renovated house and the pre-buried return pipe, it is only necessary to connect the hot water pipe with one end of the return pipe at the farthest end of the waterway, and the other end of the return pipe is connected with the cold water inlet pipe, so that the residual cold water in the hot water pipe can be recycled back to the water heater for heating, and can be separated from the cold water pipe without interfering with the normal use of cold water. This installation method, also called "three-way water pipe", is the best installation method for zero-cold water heaters. It can only be considered as a stopgap measure to use "return valve" instead of return pipe, which will produce two serious disadvantages.
First, after the zero cold water mode is turned on, all water outlets will only produce hot water, but there is no cold water. At this time, hot water needs to be recycled by means of cold water pipes, so it is impossible to produce cold water alone, so remember not to water flowers or change water in fish tanks at this time. Secondly, if the water heater encounters a large amount of water during standby, such as flushing the toilet without a water tank, a water pressure difference will be formed between the cold water pipe and the hot water pipe at this moment, and the water heater may be started unexpectedly. Therefore, if there is a return pipe pre-installed at home, you can use the zero cold water heater with confidence. If there is no return pipe pre-installed, Lei suggests that you consider it carefully.
In addition to the above disadvantages, all zero-cold water heaters have problems in energy consumption and noise during use. The circulating pump will consume electricity to pump water, and it will produce a lot of noise. The water heater will also consume a lot of gas when it heats the cold water repeatedly, and the power consumption and gas consumption will definitely increase a lot in a year. Therefore, the zero cold water heater is mainly to improve your water use experience, which is completely incompatible with energy saving and money saving. Zero cold water heater is really easy to use, but the actual experience varies from person to person. Before purchasing, you should consider whether to place an order according to your own situation and needs.
Stop staring at zero cold water, these parameters are actually more important.
So, how to choose a gas water heater, and who is more suitable to use a zero cold water heater? Xiao Lei's suggestion is that if your house is newly renovated and return pipe has been embedded, you can buy and use it with peace of mind. If the budget is not particularly tight, you can give priority to the "three-pipe zero cold water heater", which has a larger water output, a longer service life and relatively less noise.
There are no users in return pipe embedded in the house. If your water heater is installed far away from the bathroom and kitchen, and cold water must be put in for several minutes each time, it is suggested that it can be installed, which can really improve the water use experience, but the electricity and gas charges may increase. However, set the on mode, and get into the habit of turning off the water heater after taking a shower at ordinary times, so as to avoid the water heater being started in free time, and the increased cost will not be too much, which should be within an acceptable range.
However, if your water heater is installed outside the bathroom or even in the bathroom, there is no need to change it to zero cold water, which will cause some trouble to other scenes in your home at ordinary times, and it will not be worth the candle. For these small partners, we should actually pay attention to several other parameters on the gas water heater, which are more important than "zero cold water", that is, the constant temperature technology of water service and the lower fan.
As mentioned above, in the case of unstable water pressure, the hot water temperature of many water heaters rises and falls, and they may be scalded if they are not careful, and the water servo constant temperature technology can solve this problem well. The water heater accurately monitors the change of water pressure through the internal water quantity server, and automatically adjusts the gas intake according to this change to realize the constant water temperature. With this function, you can accurately set the outlet temperature of the water heater, even if the external water pressure fluctuates, you can adjust it intelligently, without worrying about the water temperature being affected, which is more obvious than the experience improvement brought by zero cold water.
The lower fan is a point that must be paid attention to when purchasing gas water heaters. Compared with the upper fan, it has a larger air intake, which can make the gas burn fully, and the high thermal efficiency can also reduce the possibility of carbon monoxide production. Secondly, the installation position of the lower fan is far away from the top high temperature area, so the fan will not age rapidly due to high temperature, and the service life is longer; Finally, the noise of the lower fan is relatively less, so it won't make too much noise when taking a bath. Therefore, the selection of gas water heaters must give priority to the lower fan. Although the price is slightly more expensive, the experience is definitely significantly improved.
The name of zero cold water heater sounds mysterious, but it is not so tall to simply improve and upgrade the traditional gas water heater. Limited by the different installation and use of products and the current technical means, the zero-cold water heater is not so perfect, and there are still many shortcomings and great limitations. Therefore, when you choose a product, don't be fooled easily. Even if others say that it is hype, the product may not be suitable for you. The water servo constant temperature and the lower fan are the key points that deserve more attention, which is the key for you to buy a good water heater.



